Wood shingles have a pleasant and traditional look when properly applied to a roof. before you install wood shingle roof materials, you need to take a look at what the job actually entails. there is more to the project than just climbing onto your roof and nailing down the shingles.. This first small wooden home in ca is a perfect example of a beautiful low-rise roof design. clad in knotty cedar siding and surrounded by a wood deck, it’s only 1100 sq.ft. the asymmetrical roof cleverly extends on one side to make up a car port. with such disproportionally wide geometry it gets so low you can touch it.. Cover the roofing sheets with tar paper. install the tar paper starting with the bottom of the roof and make sure the strips overlap for at least 2″. in addition, fit a 12” strip over the top ridge. install the shingles starting with the left- bottom of the roof, after fitting the starting course..
My first thought is, the roof projection without the drip edge will work fine, just touch up the fascia and be done. but if the drip edge is an aesthetic piece, as in covering up the exposed edge of the roof plywood, then perhaps a rake mold can work in its place. it is available in pvc plastic and will not rot, but it is very prone to extreme. Pull up the felt paper underneath the shingles. working your way up the roof, expose all of the rotted wood. leave the next course of shingles intact by carefully removing the second set of four nails. during a reroof, start at the peak of the roof and remove all shingles, prying them up with a pitchfork, working your way down the roof.. This is part two of the porch build where i am doing the roof. i show how i construct it showning in detail how to do the lead flashing.
0 komentar:
Posting Komentar